Lee - 223 Rem Collet Die Conversion Kit making the sling suitable for

making the sling suitable for all makes of rifle

(#BT33) is installed with the Steel Bar Nut inside the free float tube and the 1913 Picatinny rail on the outside with the matching holes aligned

These die bodies are 7/8"-14 threaded for any standard press

Heavily reinforced joints and dual layers of webbing and foam protect your barrel from a lifetime of damage)

Lee - 223 Rem Collet Die Conversion Kit making the sling suitable forThere is no loading system that will load more accurate ammunition than Lee Collet Dies. A collet squeezes the case neck against a precision mandrel for a perfect bullet fit with minimun run out. No case lube is needed. Cases last ten times longer, so the savings on only 35 cases will pay for the dies. Maximum accuracy is usually achieved by seating the bullet out for enough to touch or almost touch the rifling. This provides the shot start pressure