Veritas Grinding Jig bestsellers-resort Japanese steel is hard and

Japanese steel is hard and sharp

Smooth finish reduces sanding time

Typically the ground edge is the one used to sharpen - the smooth edge is honed only at the very end to remove the bur

Blade Length: 140 mm

Veritas Grinding Jig bestsellers-resort Japanese steel is hard andThe grinding jig works with any power or hand grinder that has a tool rest. Put a tool in the jig, slide it against the alignment pin and one clamping thumbscrew to square it, adjust the blade projection for bevel angle, and tighten in place. The tool is now held squarely in the jig at the chosen bevel angle. Slide the jig back and forth across the tool rest and stone face to sharpen the tool. The brass clamping bolts have nylon washers to prevent